Basic copy operations
2
C451 2-104
– When the “Center Staple” and “Half-Fold” settings are selected, the
following Finishing settings are not available.
Group
Offset
Staple
Punch
– To cancel the “Center Staple” and “Half-Fold” setting, touch [No] or
the button for a different setting.
4 Touch [OK], and then touch [OK] again.
To fold copies in three (“Tri-Fold” setting)
When Finisher FS-608 is installed
!
Detail
When copies are to be folded in three, settings can be specified to select
whether the printed side is on the inside or the outside. For details on se-
lecting the setting, refer to “Copier Settings” on page 11-26.
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
Paper weight Paper size Maximum number of tri-
folded sheets
64 g/m
2
to 90 g/m
2
A4 w, 8-1/2 × 11 w, 16K w 1 sheet
Number of folded sheets Maximum number of sets
1 sheet 50 sets or less
To Next Page
Loading...
Need help?
General
