Additional copy operations
3
C451 3-46
– To cancel changes to the settings, press the [Reset] key. All chang-
es to the settings are canceled.
4 Touch [OK].
The Accessibility Setting screen appears again.
5 Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
Setting the “Sound Setting” functions
With the Sound Setting functions, settings can be specified for the sounds
that are produced, for example, when a key is pressed.
The following Sound Setting functions are available.
As the factory default, “Medium” is selected for all operation sounds.
Operation Confirmation Sound
Operation Confir-
mation Sound
Input Accept Sound When pressing a key in the control panel or a but-
ton on the touch panel
Invalid Input Sound When incorrectly pressing a key in the control
panel or a button on the touch panel
Basic Sound When switching settings and the default setting is
selected
Successful Comple-
tion Sound
Completed Opera-
tion Sound
When an operation is completed successfully
Completed Trans-
mission Sound
When a communication operation is completed
successfully
Completed Prepa-
ration Sound
When a device has finished setting up
To Next Page
Loading...
Need help?
General
