Before making copies
1
C451 1-41
!
Detail
The following are cleared when the main power switch and sub power
switch are turned off.
Settings that have not been programmed
Jobs queued to be printed
Automatically clearing settings (automatic panel reset)
If no operation is performed for a specified length of time (even if the [Reset]
key is not pressed), settings that have not been programmed, such as the
number of copies, are cleared and return to their default settings.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after
1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set from Utility mode. For de-
tails, refer to “System Settings” on page 11-32.
Whether or not the automatic panel reset operation is performed when
there is a change of user can be set from the Utility mode. For details, re-
fer to “System Settings” on page 11-32.
Automatically canceling the mode screen (System Auto Reset)
If no operation is performed for a specified length of time, the screen is au-
tomatically changed to that for the mode given priority.
This is the System Auto Reset operation.
As the factory default, the Copy mode screen is displayed after 1 minute.
!
Detail
The mode screen that is displayed when the System Auto Reset opera-
tion is performed can be changed from the Utility mode. For details, refer
to “System Settings” on page 11-32.
Automatically conserving energy (Low Power mode)
If no operation is performed for a specified length of time, the touch panel
goes off and the machine automatically enters a mode where it conserves
energy.
To Next Page
Loading...
Need help?
General
