Managing jobs
10
C451 10-10
4 Check the information that is displayed, touch [Yes] if the correct job is
indicated, and then touch [OK].
– To quit deleting the job, touch [No], and then touch [OK].
The screen displayed before [Delete] was touched appears again, and
the job is deleted from the Current Jobs list.
5 Touch [Close] or press the [Reset] key.
The Basic screen appears again.
2
Note
If user authentication settings have been applied and the machine is set
so that jobs cannot be deleted by other users, the job is not deleted.
A job being performed can also be deleted by selecting the job in the sub
display area, then touching [Delete].
Checking job settings
Job settings for stored jobs, jobs being printed, jobs queued to be printed
and held jobs can be checked.
1 Touch [Job List] in the left panel, and then touch [Job Details].
The Job List screen appears.
2 Display the list containing the job whose settings are to be checked.
3 Select the job to be deleted, and then touch [Check Job Set.].
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.
– The contents and number of Job Settings screens differ depending
on the job that was selected.
To Next Page
Loading...
Need help?
General
