Before making copies
1
C451 1-44
1 Press the [Power Save]
key (or press the sub
power switch).
– As the factory de-
fault, the machine
enters Low Power
mode.
!
Detail
Whether the machine enters Low Power mode or Sleep mode when the
[Power Save] key is pressed can be set from the Administrator Settings
mode.
For details, refer to “System Settings” on page 11-32.
Automatically turning the machine on/off (Weekly Timer)
The machine can be set to automatically enter Sleep mode according to a
usage schedule determined by the administrator so the machine’s use can
be limited.
This is the Weekly Timer.
Follow the procedure described below to use the machine while the Weekly
Timer is being used.
To Next Page
Loading...
Need help?
General
