Troubleshooting
4
C451 4-103
7 Insert the staple car-
tridge holder, sliding it
along the rails in the
compartment.
– Check that the staple
cartridge holder is
securely inserted as
far as possible.
8 Close the front door.
2
Reminder
If stapling still cannot be resumed, even after performing the above pro-
cedure, contact your service representative.
Clearing jammed staples in the saddle stitcher
!
Detail
For details on clearing misfed paper in the finisher, refer to “Clearing a pa-
per misfeed in Finisher FS-519” on page 4-79.
For details on clearing misfed paper in the saddle stitcher, refer to “Clear-
ing a paper misfeed in the saddle stitcher” on page 4-87.
1 Remove all paper from the finisher.
To Next Page
Loading...
Need help?
General
