Additional copy operations
3
C451 3-44
3 Select whether or not the message is displayed.
– To cancel changes to the settings, press the [Reset] key. All chang-
es to the settings are canceled.
4 Touch [OK].
The Accessibility Setting screen appears again.
5 Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
2
Note
The Enlarge Display mode is compatible with basic copy, scanning and
fax functions. With the Enlarge Display mode, text and illustrations are
displayed at a larger size so that they can be seen more easily. For details
on the Enlarge Display mode, refer to the User’s Guide [Enlarge Display
Operations].
If “OFF” is selected in the Enlarge Display Mode Confirmation screen, the
screen is not displayed.
Setting the “Message Display Time” function
It is possible to specify the length of time for displaying warning messages,
which appear, for example, when an incorrect operation is performed.
As the factory default, “3 seconds” is selected.
1 Display the Accessibility Setting screen, and then touch [↓] to display
the next screen.
– For details on displaying the Accessibility Setting screen, refer to
“Displaying the Accessibility Setting screen” on page 3-33.
To Next Page
Loading...
Need help?
General
