Copy paper/original documents
6
C451 6-23
% There are limits on the types of paper that can be loaded in a paper
tray. For details on the type of paper that can loaded, refer to
“Specifications” on page 5-2.
% If postcards were loaded, select “Thick 3”.
5 Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
2
Reminder
If special paper is loaded into the paper tray, be sure to select the corre-
sponding paper type, otherwise a paper misfeed may occur.
!
Detail
For details on loading the paper into tray 3, refer to “Loading paper into
tray 3” on page 1-65.
For details on loading the paper into tray 4, refer to “Loading paper into
tray 4” on page 1-68.
Printing double-sided copies manually
The “Duplex 2nd Side” setting is used to print double-sided copies on paper
that cannot be fed through the automatic duplex unit.
The paper to be used for printing the second side can be loaded into the by-
pass tray.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
To Next Page
Loading...
Need help?
General
