Basic copy operations
2
C451 2-53
Typing in separate X and Y zoom ratios (Individual Zoom settings)
By using the keypad, separate zoom ratios can be typed in directly for the
horizontal direction (between 25.0% and 400.0%) and for the vertical direc-
tion (between 25.0% and 400.0%).
By combining different horizontal and vertical zoom ratios, the copy image
can be adjusted as shown below.
0 If a value outside the allowable range is specified, the message “Input er-
ror” appears. Type a value within the allowable range.
If the value was incorrectly entered, press the [C] (clear) key to erase the
value, and then specify the correct value.
1 In the Basic screen, touch [Zoom].
The Zoom screen appears.
To Next Page
Loading...
Need help?
General
