- 216 -
5. Fax
Set the machine so that it can determine whether the sender is sending a fax while the
recipient is holding the handset of the external telephone after picking it up to answer the call
when the telephone rings in Tel/Fax Ready mode.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Fax Setting].
6
Press or several times and press [CNG Detection] and set it to [ON].
Pressing [CNG Detection] switches between [ON] and [OFF].
•
[ON]: The machine detects fax beep signals, and then automatically starts receiving
a fax.
•
[OFF]: If the sender is sending a fax, the machine receives a fax with manual
reception.
7
Press [Back] until the home screen is displayed.
Setting Fax Detection Mode
To Next Page
Loading...
Need help?
General
