Oki MC573 Advanced Manual

- 334 -
9. Operating Management/ Specifications
• Print Position Adjust
• Drum Cleaning
•Hex Dump
Color Menu
BG Setting Black 0 Corrects variations in print results caused by temperature and
humidity conditions and differences in print density and
frequency. Change the setting if the background is dark.
Yell ow 0
Magenta 0
Cyan 0
HU Setting OFF Sets the mode to remove stain generated while being left for a
long time.
VL Cleaning - Cleans the image drum.
Set this mode when vertical white lines appear on the output.
Gloss Mode OFF Raises the fusing temperature and prints highly glossy images.
Set to [ON] when printing highly glossy images.
Item Factory
default
setting
Description
Tray 1 X Adjust 0 mm • X Adjust: Adjusts the position of the entire printing image
perpendicular to the direction of paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Y Adjust: Adjusts the position of the entire printing image
parallel to the direction of paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Duplex X Adjust: Adjusts the position of the image on the
back side of a duplex print perpendicular to the direction of
paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Duplex Y Adjust: Adjusts the position of the image on the
back side of a duplex print parallel to the direction of paper
movement.
Available range: ±2.00 mm (0.25 mm increments).
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm
Tray 2/3
(Optional)
X Adjust 0 mm
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm
MP Tray X Adjust 0 mm
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm
Item Factory
default
setting
Description
Drum Cleaning OFF Sets whether to clean the drum before printing. The image
quality improvement may be expected.
Item Factory
default
setting
Description
Item Factory
default
setting
Description
Hex Dump OFF Prints out the data received from the host computer in hex. To
finish printing, turn the machine off.
Item Factory default setting Description
Density Control Auto Select "Auto" or "Manual"
for adjusting density.
Adjust Density - Adjusting density is
performed right after this
menu is selected.
Color Tuning / Print Pattern - A test page is printed for
checking the adjusting value
to be entered for any other
C/M/Y/K Tuning menus.
Cyan Tuning Cyan Highlight 0 Adjust the value for
Highlight / Mid-tone / Dark of
each color within a range of
-3 to +3.
+ : Adjusted to be darker.
- : Adjusted to be lighter.
Cyan Mid-Tone 0
Cyan Dark 0
Magenta Tuning Magenta Highlight 0
Magenta Mid-Tone 0
Magenta Dark 0
Yellow Tuning Yellow Highlight 0
Yellow Mid-Tone 0
Yellow Dark 0
Black Tuning Black Highlight 0
Black Mid-Tone 0
Black Dark 0
Density Cyan 0 Adjust the total density of
each color within a range of
-3 to +3.
+ : Adjusted to be darker.
- : Adjusted to be lighter.
Magenta 0
Yellow 0
Black 0
Adjust Registration Color registration
adjustment is performed.
Ink Simulation Ink Simulation OFF Sets the ink simulation. This
setting is enabled only for
PS language jobs.

Oki MC573 Specifications

General

Brand	Oki
Model	MC573
Category	All in One Printer
Language	English