Oki MC573 Advanced Manual

- 343 -
9. Operating Management/ Specifications
• Keyboard Layout
• Admin Password
• Reset Settings*
2
• Job Log Setup
• Print Statistics
*1 A message is displayed to confirm the equipment restarts automatically when changes have been made. Select
[Yes] to continue. Select [No] to cancel.
*2 A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue.
Select [No] to cancel.
*3 A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select
[No] to cancel.
Item Factory default setting Description
Keyboard Layout QWERTY Select which to use QWERTY keyboard or
AZERTY keyboard for your keyboard on the
touch panel.
Item Factory default setting Description
New Password
Enter password (Verify)
999999 Changes the administrator password. 6 to
12 characters can be used.
Item Factory default setting Description
Reset Settings*
2
- Deletes job macros, fax transmission /
reception data, and the history information,
and returns the settings to the default.
Item Factory default setting Description
Clear Job Log*
3
- Clears the saved job logs.
Item Factory default setting Description
Supplies Report Disable Sets whether to print the consumable
counter's report.
Reset Main Counter - Resets the main counter.
Reset Supplies Counter - Reset the consumable counter.
This item is displayed when [Supplies
Report] is set to [Active].
User Install
Item Factory
default
setting
Description
Time Zone +00:00 Sets the time GMT zone.
Available range: -12:00 to +13:00 (15 minutes
/ increment)
Daylight Saving ON Sets whether to enable the Daylight Saving
mode.
Time Setup Auto Setup SNTP Server
(Primary)
Sets the SNTP server to use for setting the
current date and time. You can enter up to
64 characters.
SNTP Server
(Secondary)
Manual Setup 2001/01/01 0:00 Sets the current date and time manually.
Power Setup Auto Power Off Auto Config Sets the behavior of Automatic Power Off.
Power Supply Return State Continue Sets a power supply method at the time of
recovery from the power failure.
Select [Manual] if you do not want to make the
machine automatically to turn on after the
recovery.
Office Document Mode Mode1 This mode allows to always enable the toner
save function.
To forcibly enter the machine in toner save
mode, select Mode2.
High Humid Mode OFF Sets whether to enable the humidity mode.
Selecting [Enable] reduces curl generated
while printing.
Quiet Mode OFF Sets whether to reduce the printing noise.
Setting to [ON] affects printing speed.
Drum Near Life Timing 1000 Sets the timing for the near life warning for the
drum cartridges.
Fuser Near Life Timing 1000 Sets the timing for the near life warning for the
fuser unit.
Belt Near Life Timing 1000 Sets the timing for the near life warning for the
belt unit.
MF (Tone) / DP (Pulse) Tone Select a dial type.
Tone
Pulse
Reception Mode Fax Ready
Mode
Sets a reception mode.
Fax Ready Mode
Tel / Fax Ready Mode
Ans / Fax Ready Mode
Tel Ready Mode
DRD (Distinctive Ring Detection)

Oki MC573 Specifications

General

Brand	Oki
Model	MC573
Category	All in One Printer
Language	English