- 328 -
9. Operating Management/ Specifications
Forwarding
Setting
Forwarding Setting OFF Sets whether to enable the fax forwarding
mode.
Forwarding Number (NULL) Sets a fax number used for the fax
forwarding mode.
TAD Mode Type 3 Sets an operation type in Tel / Fax Ready
mode.
[Type 3]: A fax signal is detected in
15 seconds from when the answering
machine answers. Normally, use this type.
[Type 1]: A fax signal is detected right after
the answering machine answers, and then
the reception starts. If you have any fax
reception problems, they may be improved if
this type is set.
[Type 2]: A fax signal is detected right after
the answering machine answers. Set this
type if you usually use this machine as a
phone.
Tel Priority Mode OFF Sets when the external telephone and the
machine ring in Tel / Fax Ready mode.
[ON]: The sender is assumed to make a
voice call. The telephone rings early.
CNG Detection OFF Sets whether to determine whether the
sender is sending a fax during the off the
hook condition in Tel / Fax Ready mode.
T/F Timer Programming 35 seconds Sets when to start the auto fax reception if
the communication does not start even after
an incoming call arrives in Tel / Fax Ready
mode or Ans / Fax Ready mode.
Soft Ringer Volume High Sets a phone ring volume in Tel / Fax Ready
mode.
Remote Receive Number OFF Sets a remote switch over number.
Item Factory
default
setting
Description
FaxServer Function
Item Factory default setting Description
Environmental Settings FaxServer Function OFF Sets whether to use
scanning to fax server.
Prefix (NULL) Sets to prefix code for
scanning to fax server.
Suffix @faxserver Sets to suffix code for
scanning to fax server.
Text OFF Sets whether to add body
text.
Default Settings Scan Size A4 or Letter Sets the default scan size.
Density 0 Sets the default density.
Resolution Normal Sets the default resolution.
Background Removal Auto Sets the default setting of
the background removal.
Continuous Scan OFF Sets whether to use
Continuous Scan mode by
default.
Preview OFF Sets the preview image of
sending image.
Compression Rate Low Selects the default
compression level.
Configure Shortcuts 01: Manual Dial
02: Speed Dial
03: Group List
04: Tx History
05: Scan Size
Sets the shortcut button for
the [Internet Fax] tab.
Security Function Broadcast Destination ON Sets whether to indicate the
transmission destination
number before starting
broadcast transmission.
Confirm Dial OFF Sets whether to reenter the
transmission destination fax
number before sending.