- 341 -
9. Operating Management/ Specifications
• Default Mode
• Operation Clear
• Sound Control
• Local Interface*
1
Configure Home Screen
Factory default setting Description
Copy
Scan
Print
Fax/Internet Fax
Troubleshoot
Register frequently-used functions on the Home Screen.
Manage Unit
Item Factory default setting Description
Default Mode Home Sets the default mode screen of this
machine.
Item Factory default setting Description
Operation Timeout 3 Sets time for automatic reset of screen to
begin.
Available range: 1 to 10 minutes
Clear After Job OFF Sets whether to reset after job is completed.
Item Factory default setting Description
Key Touch Tone Volume Middle Sets the volume of the key-touch tone.
Copy Buzzer Volume Middle Sets the volume for the copy complete
sound.
FAX Buzzer Volume Middle Sets the volume for the transmission
complete sound.
JAM Buzzer Volume Middle Sets the volume for the paper jam alert tone.
AirPrint Buzzer Volume Low Sets the AirPrint confirmation operation
sound.
Item Factory default
setting
Description
USB Menu USB Enable Sets whether to enable USB.
Soft Reset Disable Sets whether to enable the soft reset
command.
Speed 480Mpbs Selects the maximum transfer speed of USB
interface.
Offline Receive Disable Set whether to receive data in offline state or
in recoverable error state.
Serial Number Enable Sets whether to use a USB serial number.
Connected Host Normal Sets a host to be connected.