- 225 -
5. Fax
You can enter up to 20 characters including # or *.
13
Press [OK].
You can perform Fcode confidential transmission by entering the sub address that is
registered to an Fcode confidential box of the recipient's machine. Check the destination sub
address before sending.
1
Press [Fax/Internet Fax] or the (FAX) button.
The fax/Internet fax top screen appears.
2
Set a document in the ADF or on the document glass.
3
Press [Fax].
4
Press [Communicating Function] on the [Advanced] tab.
5
Press [Fcode Tx].
6
Enter the sub address of the box that is registered to the recipient's machine.
The sub address is up to 20 characters in length.
7
Press [OK].
8
Press [Back].
Sending a Fax to a Destination Confidential Box (Fcode
Transmission)
To Next Page
Loading...
Need help?
General
