- 217 -
5. Fax
Set the time before the machine starts receiving a fax automatically if an incoming call is not
answered in Tel/Fax Ready mode or Ans/Fax Ready mode.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Fax Setting].
6
Press or several times and press [T/F Timer Programming].
7
Select a T/F time.
•
[20 seconds]: If an incoming call is not answered within 20 seconds, the machine
starts receiving a fax automatically.
•
[35 seconds]: If an incoming call is not answered within 35 seconds, the machine
starts receiving a fax automatically.
8
Press [Back] until the home screen is displayed.
Setting the T/F Timer
To Next Page
Loading...
Need help?
General
