Oki MC573 Advanced Manual

- 339 -
9. Operating Management/ Specifications
• Wireless (Infrastructure) Setting (If wireless LAN module fitted)
• Wireless(AP Mode) Setting (If wireless LAN module fitted)
• Factory Defaults
Mail Server Setup
Gigabit Network Disable Sets whether to enable access with Gigabit
Ethernet.
HUB Link Setting Auto Sets the hub linking method. Normally, select
[Auto Negotiate].
Item Factory
default
setting
Description
Wireless(Infrastructure) Disable Sets whether to enable
Wireless(Infrastructure).
Network Setting IP Address Set Auto Sets the method of assigning an IP address.
IPv4 Address 192.168.101.10
0
Sets an IP address.
This item is displayed when TCP/IP protocol
is enabled.
Subnet Mask 255.255.255.0 Sets a subnet mask.
This item is displayed when TCP/IP protocol
is enabled.
Gateway
Address
0.0.0.0 Sets a gateway address.
This item is displayed when TCP/IP protocol
is enabled.
DHCPv6 Disable Specify whether to enable DHCP when using
IPv6.
WPS WPS-PBC - WPS-PBC is executed.
WPS-PIN - WPS-PIN is executed.
Wireless
Network
Selection
A list of access point name found
in the search
- Displays a list of wireless LAN access points'
names that are found in a search.
Manual Setup SSID (NULL) Enter an SSID.
Security Disable Selects the security of the wireless LAN
function.
"WPA-EAP" and "WPA2-EAP" can be set
only on the Web.
WEP Key (NULL) Displays if [Security] is set to [WEP].
Enter the WEP key.
WPA
Encryption
Type
AES Select a WPA2-PSK encryption type.
Displays if [WPA-PSK] or [WPA2-PSK] is
selected for [Security].
WPA Pre-
shared Key
(NULL) Enter the Pre-shared Key.
Displays if [WPA-PSK] or [WPA2-PSK] is
selected for [Security].
Wireless reconnection - Wireless(Infrastructure) reconnection is
executed.
Item Factory default setting Description
Item Factory default setting Description
Wireless(AP Mode) Disable Sets whether to enable
Wireless(AP Mode).
Automatic connection (push-button) - Connects automatically
(push button) using
Wireless(AP Mode).
Manual Setup SSID (Device-specific string) Displays SSID of
Wireless(AP Mode).
Password (8-digit number) Displays the password of
Wireless(AP Mode).
Connection Setting SSID (Device-specific string) Sets SSID of Wireless(AP
Mode).
Password (8-digit number) Sets the password of
Wireless(AP Mode).
IPv4 Address 192.168.110.100 Sets the password of
Wireless(AP Mode).
AP Mode User Setting Don't disclose user Sets whether to open the
AP mode information to
other than the
administrator.
Item Factory default
setting
Description
Factory Defaults - The settings of the network, mail server,
LDAP server, and secure protocol server are
returned to the default settings.
Item Factory default setting Description
SMTP Server (NULL) Sets the IP address or server name for the SMTP server.
SMTP Port 25 Sets the port number for the SMTP server. Normally, use
the default setting.
Available range: 1 to 65535
SMTP Encryption None Selects an encryption method in the SMTP
communication.
Receive Setting Disable Sets the protocol to be used for receiving e-mails.
POP3 Server (NULL) Sets the IP address or server name for the POP3 server.

Oki MC573 Specifications

General

Brand	Oki
Model	MC573
Category	All in One Printer
Language	English