- 23 -
1. Basic Operations
Easy Setup
In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by
using [Device Settings] on the touch panel.
1
Press [Device Settings] on the touch panel.
2
Press [Easy Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Follow the on screen instructions.
• Language Setting
• Date/Time Setting
• Admin Password
• Fax Setting
• Network Setting
Item Description
Language Setting Sets the language that is displayed on the operator
panel.
Item Description
Time Zone Sets the GMT time zone.
Daylight Saving Sets daylight saving to ON or OFF.
Server SNTP Server (Primary) Sets the SNTP server to use for setting the
current date and time. You can enter up to
64 characters.
SNTP Server (Secondary)
Manual Date Sets the current date and time manually.
Time
Item Description
New Password
Enter Password (Verify)
Changes the administrator password. 6 to
12 characters can be used.
Item Description
Fax Number Sets the fax number of this machine. You
can enter up to 20 digits.
Sender ID Sets the sender's information. You can
enter up to 22 characters.
Item Description
Enabling Default Gateway (If wireless LAN module fitted) Sets a wired LAN or wireless LAN.
To Next Page
Loading...
Need help?
General
