Omron FQ2-S4 User Manual

Shortening the Measurement Takt Time
218
FQ2-S4 User’s Manual
If you use partial input, perform teaching again. Partial input on the X axis is supported only by the FQ2-
S4@@@@@/FQ2-S4@@@@@-M.
Changing the Image Input Mode
Pixel sampling can be applied to the input image to reduce image input time.
[Image] − [Camera setup] − − [Image input mode]
If you change the image input mode, perform teaching again.
• The minimum input widths are 16 for the X axis and 8 for the Y axis.
• The values of the monitor display positions are displayed for the coordinates in the measurement results.
• The coordinate values will not change as a result of the partial input settings.
Parameter Setting Description
Image Input
Mode
High-speed or Standard
Default for FQ2-S4@@@@@/FQ2-S4@@@@@-M:
High-speed, Default for FQ2-S4@@@@@-08/FQ2-S4@-13@:
Standard
Pixel sampling can be applied to the input image to
reduce image input time.
Note
Important
Important

Omron FQ2-S4 Specifications

General

Brand	Omron
Model	FQ2-S4
Category	Digital Camera
Language	English