Configuring Inspection Items
94
FQ2-S4 User’s Manual
4-3 Configuring Inspection Items
Adding New Inspection Items
1
Press [Inspect] − [Inspection].
2 Press an unused inspection item number.
3 Press [Add item.] on the menu.
4 Select an inspection item, such as [Search].
When registering multiple inspection items, press the
inspection item number after 1.--- and set it in the
same way.
If more than seven inspection items are set, drag the icon at the bottom of the menu upward to display the next
inspection item numbers.
Note
To Next Page
Loading...
Need help?
General
