Siemens SINAMICS S210 User Manual

8.2.2 Converter ambient conditions
Property Version
Ambient conditions for transport in the transport packaging
Climatic ambient conditions ‑40 °C … +70 °C, according to Class 2K4 to EN 60721‑3‑2
maximum humidity 95 % at 40 °C
Mechanical ambient condi‐
tions
Shock and vibration permissible according to 2M3 to EN 60721‑3‑2
Protection against chemical
substances
Protected according to Class 2C2 to EN 60721‑3‑2
Biological environmental
conditions
Suitable according to Class 2B2 to EN 60721‑3‑2
Ambient conditions for long-term storage in the product packaging
Climatic ambient conditions
1)
‑25 °C … +55 °C, according to Class 1K4 to EN 60721‑3‑1
Protection against chemical
substances
Protected according to Class 1C2 to EN 60721‑3‑1
Biological environmental
conditions
Suitable according to Class 1B2 to EN 60721‑3‑1
Ambient conditions in operation
Installation altitude
● Up to 1000 m above sea level without restrictions
● Up to 4000 m, restrictions, see the following table
Climatic ambient conditions
● Temperature range: 0 °C … +50 °C
● Relative humidity: 5 … 95%, condensation not permitted
● Oil mist, salt mist, ice formation, condensation, dripping water, spraying water, splashing
water and water jets are not permitted
Increased ruggedness regarding temperature range and relative humidity; therefore better
than 3K3 according to EN 60721-3-3
Mechanical ambient condi‐
tions
● Vibration levels permissible according to Class 3M2 to EN 60721-3-3
Vibration test in operation according to IEC 60068-2-6 Test Fc (sinusoidal)
– 10 Hz … 13 Hz: 0.075 mm deflection amplitude
– 13 Hz … 150 Hz: 1 g acceleration amplitude
– 10 frequency cycles per axis
● Shock permissible according to Class 3M2 to EN 60721-3-3
Shock test in operation according to IEC 60068-2-27 Test Ea (half sinusoidal)
– 5 g peak acceleration
– 30 ms duration
– 3 shocks in all three axes in both directions
Protection against chemical
substances
Protected according to 3C2 to EN 60721‑3‑3
Biological environmental
conditions
Suitable according to 3B2 to EN 60721‑3‑3
Pollution Suitable for environments with degree of pollution 2 according to EN 61800-5-1
Technical specifications
8.2 Technical specifications of the converter
SINAMICS S210 servo drive system
200 Operating Instructions, 12/2017, A5E41702836B AA

Siemens SINAMICS S210 Specifications

General

Brand	Siemens
Model	SINAMICS S210
Category	Servo Drives
Language	English