To Next Page

To Previous Page

Note

Setting ranges for p0210 as a function of the rated power unit voltage:

U_rated = 400 V:

- p0210 = 380 ... 480 V (AC/AC), 510 ... 720 V (DC/AC)

U_rated = 500 V:

- p0210 = 500 ... 600 V (AC/AC), 675 ... 900 V (DC/AC)

U_rated = 660 ... 690 V:

- p0210 = 660 ... 690 V (AC/AC), 890 ... 1035 V (DC/AC)

U_rated = 500 ... 690 V:

- p0210 = 500 ... 690 V (AC/AC), 675 ... 1035 V (DC/AC)

The precharging switch-in threshold for the DC link voltage (Vdc) is calculated from p0210:

Vdc_pre = p0210 * 0.82 * 1.35 (AC/AC)

Vdc_pre = p0210 * 0.82 (DC/AC)

The undervoltage thresholds for the DC link voltage (Vdc) are calculated from p0210 as a function of the rated power

unit voltage:

U_rated = 400 V:

- U_min = p0210 * 0.78 (AC/AC) > 330 V, p0210 * 0.60 (DC/AC) > 380 V

U_rated = 500 V:

- U_min = p0210 * 0.76 (AC/AC) > 410 V

U_rated = 660 ... 690 V:

- U_min = p0210 * 0.82 (AC/AC) > 565 V, p0210 * 0.63 (DC/AC) > 650 V

U_rated = 500 ... 690 V:

- U_min = p0210 * 0.82 (AC/AC) > 420 V, p0210 * 0.63 (DC/AC) > 480 V

r0302[0] motor code DRIVE-CLiQ

Data type: Unsigned16 P group: Motor

Description: Displays the number of the motor with DRIVE-CLiQ

When the drive powers up, the motor code is read out the motor.

For r0302 = 0, the motor was not identified.

r0304[0] Rated motor voltage