European Low-Voltage Directive
SIMOTICS motors comply with the Low-Voltage Directive 2014/35/EU.
European Machinery Directive
SIMOTICS motors do not fall within the area of validity covered by the Machinery Directive.
However, the use of the products in a typical machine application has been fully assessed for
compliance with the main regulations in this directive concerning health and safety.
European EMC Directive
SIMOTICS motors do not fall within the area of validity covered by the EMC Directive. The
products are not considered as devices in the sense of the directive. Installed and operated
with a converter, the motor - together with the Power Drive System - must comply with the
requirements laid down in the applicable EMC Directive.
Eurasian conformity
SIMOTICS motors comply with the requirements of the customs union Russia/Belarus/
Kazakhstan (EAC).
China Compulsory Certification
SIMOTICS motors do not fall within the area of validity covered by the China Compulsory
Certification (CCC).
CCC negative certification:
CCC product certification (https://support.industry.siemens.com/cs/products?
search=CCC&dtp=Certificate&mfn=ps&o=DefaultRankingDesc&pnid=13347&lc)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is
important that you carefully observe the contents of the quotation and that there is a cUL mark
on the rating plate!
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates for SIMOTICS motors can be downloaded from the Internet at the following link:
Certificates for SIMOTICS motors (https://support.industry.siemens.com/cs/ww/de/ps/13347/
cert)
European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the use
of certain hazardous substances.
Appendix
A.3 Directives and standards
SINAMICS S210 servo drive system
748 Operating Instructions, 12/2017, A5E41702836B AA
To Next Page
Loading...
Need help?
General
