Commissioning Manual
294 01/2017
Importing the activation file
The new activation file must be imported into the control system to extend the CNC lock function. The machine manufacturer
can import the new activation file directly or send the file to the end user who transfers the file to the control system. For
more information about how to import the activation file, see Section "Importing the activation file (Page 292)".
If no error occurs when importing the activation file, the CNC lock function with the new lock date is active in the control
system. You can find the extended lock date being displayed on the HMI screen, for example:
Note
If an error occurs when importing the activation file, an error
-
specific alarm will be issued. The state of the CNC lock function
remains unchanged.
Deactivating the CNC lock function
To deactivate the CNC lock function, the machine manufacturer must use the AMM tool to create a deactivation file
.
Creating the deactivation file
Proceed through the following steps to create the deactivation file:
Start Access MyMachine on your computer.
Select the following menu command:
in the displayed dialog box to proceed to the next step.
To Next Page
Loading...
Need help?
General
