Machining the workpiece
5.12 Displaying G functions and auxiliary functions
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
169
Non-modal synchronized actions can only be identified by their status display. They are only
displayed during execution.
ID=n Modal synchronized actions in the automatic mode up to the end of pro-
gram, local to program; n = 1... 254
IDS=n Static synchronized actions, modally effective in every operating type,
also beyond the end of program; n = 1... 254
Non-modal synchronized actions in automatic mode
Note
Numbers ranging from 1 to 254 can only be assigned once, irrespective of the identification
number.
Display of synchronized actions
Using softkeys, you have the option of restricting the display to activated synchronized
actions.
Select the "Machine" operating area.
Pres
s the
<AU
TO>,
<M
DA> o
r <J
OG
> key
.
nu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
You obtain a display of all activated synchronized actions.
Press the "ID" softkey if you wish to hide the modal synchronized a
c-
tions in the automatic mode.
Press the "IDS" softkey if you wish to hide static synchronized a
ctions.
To Next Page
Loading...
Need help?
General
