Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.1 Drilling
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
301
9.1.4
Reaming (CYCLE85)
Function
With the "Reaming" cycle, the tool is inserted in the workpiece with the programmed spindle
speed and the feedrate programmed at F.
If Z1 has been reached and the dwell time expired, the reamer is retracted at the
programmed retraction feedrate to the retraction plane.
Clamping the spindle
For ShopTurn, the "Clamp spindle" function can be set up by the machine manufacturer.
Machine manufacturer
Please refer to the machine manufact
urer's specifications.
See also
Clamping the spindle (Page 247)
Approach/retraction
1. The tool moves with G0 to safety clearance of the reference point.
2. The tool is inserted into the workpiece with the programmed feedrate F until it reaches the
final depth Z1.
3. Dwell time DT at final drilling depth.
4. Retraction to retraction plane with programmed retraction feedrate FR.
Procedure
1.
The part program
or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2.
Press
the "Drilling" softkey.
3.
Press the "Drilling Reaming" softkey.
4.
Press the "Reaming" softkey.
The "Reaming" input window opens.

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English