Siemens SINUMERIK 828D User Manual

Creating a ShopTurn program
8.17 Measuring cycle support
Turning
272 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
8.17
Measuring cycle support
Measuring cycles are general subroutines designed to solve specific measurement tasks.
They can be adapted to specific problems via parameter settings.
Software option
You r
equire the "Measuring cycles" option to use "Measuring cycles".
References
You will find a more detailed description on how to use measuring cycles in:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
8.18
Example: Standard machining
General information
The following example is described in detail as ShopTurn program. A G code program is
generated in the same way; however, some differences must be observed.
If you copy the G code program listed below, read it into the control and open it in the editor,
then you can track the individual program steps.
Machine manufacturer
Under all circum
stances, observe the machine manufacturer’s instructions.
Tools
The following tools are saved in the tool manager:
Roughing tool_80
80°, R0.6
Roughing tool_55
55°, R0.4
Finishing tool
35°, R0.4
Plunge cutter
Plate width 4
Threading tool_2
Drill_D5
∅5
Miller_D8
∅8
Adapt the cutting data to the tools used and the specific application conditions at the
machine.
Blank
Dimensions: ∅90 x 120
Material: Aluminum

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English