Siemens SINUMERIK 828D User Manual

Setting up the machine
3.8 Zero offsets
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
97
3.8.6
Deleting a zero offset
You have the option of deleting work offsets. This resets the entered values.
Procedure
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
...
3.
Press
the "Overview", "Basis" or "G54…G599" softkey.
4.
Press the "Details" softkey.
5.
Position the cursor on the work offset you would like to delete.
6.
Press the "Clear offset" softkey.
A confirmation prompt is displayed as to whether you really want to
delete the work
offset.
7.
Press the "OK" softkey to confirm that you wish to delete the work of
f-
set.
3.8.7
Measuring the workpiece zero
Procedure
1.
Select the "Parameters" operating area and press the "Zero offset" sof
t-
key.
2.
Press the "G54...G599" softkey and select the zero offset in which the
zero point is to be saved.
3.
Press the "Workpiece zero" softkey.

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English