Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.6 Further cycles and functions
Turning
568 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Parameter
Description
Unit
TC
Name of the swivel data record
Retraction No No retraction before swiveling
Incremental retraction in tool direction
The retraction path is entered into parameter ZR.
Maximum retraction in tool direction
Retraction in the direction of machine axis Z
Retract towards the machine axis Z and then in the direction X, Y
ZR
Retraction path - (only for incremental retraction in the tool direction)
Axis sequence Sequence of the axes which are rotated around
XY or XZ or YX or YZ or ZX or ZY
X
Rotation around X
Degrees
Y
Rotation around Y
Degrees
Tool
Tool tip position when swiveling
Tracking
The position of the tool tip is maintained during swiveling.
No tracking
The position of the tool tip changes during swiveling.
9.6.3
High-speed settings (CYCLE832)
Function
With the "High Speed Settings" function (CYCLE832), data for the machining of
free-form surfaces is pre-assigned values so that optimum machining is possible.
The call of CYCLE832 contains three parameters:
● Tolerance
● Machining type (technology)
● Input of the orientation tolerance (for 5-axis machines)
Machining of free-form surfaces involves high requirements regarding velocity, precision and
surface quality.
You can achieve optimum velocity control depending on the type of machining (roughing,
rough-finishing, finishing) very simply with the "High Speed Settings" cycle.
Program the cycle in the technology program before the geometry program is called.
The "High Speed Settings" cycle is also in conjunction with the "Advanced Surface" function.

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English