Working with a B axis (only 840D sl)
16.2 Tool alignment for turning
Turning
824 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Tool alignment for turning
The input fields for the β and γ angles for aligning the tool are available in the tool screen
and in all turning screens.
In the entry field "β" you have the possibility of selecting the main alignment of the tool:
The required angle can be freely entered
Programming when machining with a counterspindle
When machining on the counterspindle, it is programmed in exactly the same way as the
main spindle.
The direction display of the arrows depends on the settings.
Please refer to the machine manufacturer's specifications.
In the entry field "γ" you have the possibility of selecting the main alignment of the tool:
● 0°
● 180°
- or -
● Free entry field to enter the required angle
Please refer to the machine manufacturer's specifications.
To Next Page
Loading...
Need help?
General
