Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.1 Drilling
Turning
302 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Parameters, G code program
Parameters, ShopTurn program
PL
Machining plane
T
Tool name
RP Retraction plane mm D Cutting edge number
SC Safety clearance mm F
Feedrate mm/min
mm/rev
F Feedrate * S / V
Spindle speed or constant cut-
ting rate
rpm
m/min
Parameter
Description
Unit
Machining posi-
tion
(only for G
code)
• Single position
Drill hole at programmed position
• Position pattern
Position with MCALL
Z0 (only for G
code)
Reference point Z mm
FR (only for G
code)
Feedrate during retraction *
FR (only for
ShopTurn)
Feedrate during retraction mm/min
mm/rev
Machining
surface
(only for Shop-
Turn)
• Face C
• Face Y
• Peripheral surface C
• Peripheral surface Y
Position
(only for Shop-
Turn)
• At the front (face)
• At the rear (face)
• Outside (peripheral surface)
• Inside (peripheral surface)
(only for Shop-
Turn)
Clamp/release spindle
The function must be set up by the machine manufacturer.
Z1 Drilling depth (abs) or drilling depth in relation to Z0 (inc)
It is inserted into the workpiece until it reaches Z1.
mm
DT
• Dwell time (at final drilling depth) in seconds
• Dwell time (at final drilling depth) in revolutions
s
rev
* Unit of feedrate as programmed before the cycle call

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English