Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.4 Milling
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
513
Parameter
Description
Unit
X0 or L0
Y0 or C0
Z0
(only ShopTurn)
Face C:
The positions refer to the reference point:
Reference point X or reference point length polar
Reference point Y or reference point angle polar
Reference point Z
mm
mm or de-
grees
mm
CP
X0 or L0
Y0 or C0
Z0
(only ShopTurn)
Face Y:
The positions refer to the reference point:
Positioning angle for machining area
Reference point X or reference point length polar
Reference point Y or reference point angle polar
Reference point Z
Degrees
mm
mm or de-
grees
mm
Y0 or C0
Z0
X0
(only ShopTurn)
Peripheral surface C:
The positions refer to the reference point:
Reference point Y or reference point angle polar – (only for single position)
Reference point Z
Cylinder diameter ∅
mm or de-
grees
mm
mm
C0
Y0
Z0
X0
(only ShopTurn)
Peripheral surface Y:
The positions refer to the reference point:
Positioning angle for machining surface – (only for single position)
Reference point Y
Reference point Z
Reference point X
Degrees
mm
mm
mm
Z1 Engraving depth (abs) or referenced depth (inc) mm
W
Character height
mm
DX1 or α2 Distance between characters or angle of opening – (for curved alignment
only)
mm or
Degrees
DX1 or DX2
Distance between characters or total width – (for linear alignment only)
mm
α1
Text direction (for linear alignment only)
Degrees
XM or LM
(only G code)
Center point X (abs) or center point length polar
– (for curved alignment only)
mm
YM or αM
(only G code)
Center point Y (abs) or center point angle polar
– (for curved alignment only)
mm
YM or CM
(only ShopTurn)
Center point Y or C (abs.) – (for curved alignment only)
- (only for machining surface, peripheral surface C/Y)
mm or de-
grees
ZM
(only ShopTurn)
Center point Z (abs.) – (for curved alignment only)
- (only for machining surface, peripheral surface C/Y)
mm
* Unit of feedrate as programmed before the cycle call

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English