Siemens SINUMERIK 828D User Manual

Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
577
Parameter
Description
Unit
XD Center offset in X direction
The center offset can be used for example to produce a drill hole with an exact fit. A
rotary drill (rotary drill type) or U drill (drill type) is required. Other drill types are not
suitable.
The maximum center offset is stored in a machine data code.
mm
Parameters in the "Input simple" mode
Parameter
Description
Unit
Input simple
T
Tool name
D
Cutting edge number
F Feedrate mm/min
mm/rev
S / V Spindle speed or
constant cutting rate
rpm
m/min
Machining
• Chipbreaking
• Swarf removal
Z0
Reference point Z
Z1
Final drilling depth X (abs) or final drilling depth in relation to Z0 (inc)
D
Maximum depth infeed
XD Center offset in X direction
The center offset can be used for example to produce a drill hole with an exact fit. A
rotary drill (rotary drill type) or U drill (drill type) is required. Other drill types are not
suitable.
The maximum center offset is stored in a machine data code.
mm
Hidden parameters
Parameter
Description
Value
Can be set in SD
Drilling depth
Drilling depth in relation to the tip
Tip
FD1 Percentage for the feedrate for the first infeed 90 % x
DF
Percentage for each additional infeed
90 %
x
V1
Minimum infeed
1.2 mm
x
V2
Retraction distance after each machining step
1.4 mm
x
Clearance distance
The clearance distance is calculated by the cycle
Automatic
x
DBT
Dwell time at drilling depth
0.6 s
x
DT
Dwell time at final drilling depth
0.6 s

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English