Preface
Turning
6 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
This documentation is intended for users of turning machines running the SINUMERIK
Operate software.
The operating manual helps users familiarize themselves with the control elements and
commands. Guided by the manual, users are capable of responding to problems and taking
corrective action.
This documentation describes the functionality of the standard scope. Extensions or changes
made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control.
However, no claim can be made regarding the availability of these functions when the
equipment is first supplied or in the event of servicing.
Furthermore, for the sake of clarity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case of
installation, operation or maintenance.
The meanings of some basic terms used in this documentation are given below.
A program is a sequence of instructions to the CNC which combine to produce a specific
workpiece on the machine.
The term contour refers generally to the outline of a workpiece. More specifically, it refers to
the section of the program that defines the outline of a workpiece comprising individual
elements.
A cycle, such as the tapping cycle, is a subprogram defined in SINUMERIK Operate for
executing a frequently repeated machining operation.
To Next Page
Loading...
Need help?
General
