FEATURES
1-15
If traveling at speeds under 10 km/h (6.0 mi/h),
“_ _._” is displayed.
Average fuel consumption mode
The average fuel consumption display can be
set to either “AVE_ _._ km/L”, “AVE_ _._ L/100
km” or “AVE_ _._ MPG” (for the UK only).
This display shows the average fuel consump-
tion since it was last reset.
• “AVE_ _._ km/L”: The average distance that
can be traveled on 1.0 L of fuel is shown.
• “AVE_ _._ L/100 km”: The average amount of
fuel necessary to travel 100 km is shown.
• “AVE_ _._ MPG” (for the UK only): The aver-
age distance that can be traveled on 1.0
Imp.gal of fuel is shown.
To switch between the average fuel consump-
tion displays, push the “SELECT” button for
one second when one of the displays is shown.
To reset the average fuel consumption display,
select it by pushing the “SELECT” button, and
then push the “RESET” button for at least one
second.
After resetting an average fuel consumption
display, “_ _._” is shown for that display until
the vehicle has traveled 1 km (0.6 mi).
Transmission gear display
This display shows the selected gear.
The neutral position is indicated by “ ” and by
the neutral indicator light.
Drive mode display
This display indicates which drive mode has
been selected: “STD”, “A” or “B”.
For more details on the modes and on how to
select them, refer to “D-mode (drive mode)”.
Coolant temperature display
The coolant temperature display indicates the
temperature of the coolant.
1. Average fuel consumption display
1. Neutral indicator light “ ”
2. Transmission gear display
1. Drive mode display
1. Coolant temperature display
To Next Page
Loading...
Need help?
General
