THROTTLE BODIES
7-12
EAS26970
THROTTLE BODIES
Removing the throttle body assembly
Order Job/Parts to remove Q’ty Remarks
Fuel tank Refer to “FUEL TANK” on page 7-1.
Air filter case Refer to “AIR FILTER CASE” on page 7-5.
1 Throttle position sensor coupler 1 Disconnect.
2 Accelerator position sensor coupler 1 Disconnect.
3 Sub-wire harness coupler 2 Disconnect.
4 Intake air pressure sensor coupler 1 Disconnect. Coupler marked “B”
5 Throttle servo motor coupler 1 Disconnect.
6 Coolant temperature sensor coupler 1 Disconnect.
7 Fuel hose 2
8 Throttle cable (accelerator cable) 1 Disconnect.
9 Throttle cable (decelerator cable) 1 Disconnect.
10 Throttle body joint clamp 4 Loosen.
11 Throttle body assembly 1
12 Throttle body joint clamp cap 2
13 Engine ground lead 2 Disconnect.
To Next Page
Loading...
Need help?
General
