CHASSIS SPECIFICATIONS
2-9
EAS20300
CHASSIS SPECIFICATIONS
Chassis
Frame type Diamond
Caster angle 24.0°
Trail 102.0 mm (4.02 in)
Front wheel
Wheel type Cast wheel
Rim size 17M/C × MT3.50
Rim material Aluminum
Wheel travel 120.0 mm (4.72 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Rear wheel
Wheel type Cast wheel
Rim size 17M/C × MT6.00
Rim material Aluminum
Wheel travel 120.0 mm (4.72 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Front tire
Type Tubeless
Size 120/70 ZR17M/C (58W)
Manufacturer/model MICHELIN/POWER PURE A (1KB8, 1KB9,
1KBJ, 1KBK)
DUNLOP/Qualifier II (1KB8, 1KBH, 1KBJ,
1KBP)
Wear limit (front) 1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Rear tire
Type Tubeless
Size 190/55 ZR17M/C (75W)
Manufacturer/model MICHELIN/POWER PURE (1KB8, 1KB9,
1KBJ, 1KBK)
DUNLOP/Qualifier II (1KB8, 1KBH, 1KBJ,
1KBP)
Wear limit (rear) 1.6 mm (0.06 in) (Europe)
1.0 mm (0.04 in) (AUS)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Loading condition 90–189 kg (198–417 lb)
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
High-speed riding
Front 250 kPa (2.50 kgf/cm², 36 psi)
Rear 290 kPa (2.90 kgf/cm², 42 psi)
Front brake
Type Dual disc brake
Operation Right hand operation
To Next Page
Loading...
Need help?
General
