ELECTRICAL SPECIFICATIONS
2-12
EAS20310
ELECTRICAL SPECIFICATIONS
Voltag e
System voltage 12 V
Ignition system
Ignition system TCI
Ignition timing (B.T.D.C.) 5.0°/1200 r/min
Engine control unit
Model/manufacturer TBDFE9/DENSO (1KB8, 1KBH, 1KBJ, 1KBP)
TBDFF0/DENSO (1KB9, 1KBK)
Ignition coil
Minimum ignition spark gap 6.0 mm (0.24 in)
Primary coil resistance 0.85–1.15 Ω
Secondary coil resistance 8.50–11.50 kΩ
AC magneto
Standard output 14.0 V, 33.0 A at 5000 r/min
Stator coil resistance 0.112–0.168 Ω at 20 °C (68 °F)
Rectifier/regulator
Regulator type Semi conductor-short circuit
Rectifier/regulator output voltage 14.2–14.8 V
Rectifier/regulator input voltage above 14 V at 5000 r/min
Rectifier capacity 50.0 A
Lean angle sensor
Lean angle sensor output voltage
Less than 45° 0.4–1.4 V
More than 45° 3.7–4.4 V
Battery
Model YTZ10S
Voltage, capacity 12 V, 8.6 Ah
Specific gravity 1.31
Manufacturer GS YUASA
Ten hour rate amperage 0.90 A
Headlight
Bulb type Halogen bulb
Bulb voltage, wattage × quantity
Headlight 12 V, 55 W × 2
Auxiliary light LED
Tail/brake light LED
Front turn signal light 12 V, 10.0 W × 2
Rear turn signal light 12 V, 10.0 W × 2
License plate light 12 V, 5.0 W × 1
Meter lighting LED
Indicator light
Neutral indicator light LED
Turn signal indicator light LED
Oil level warning light LED
High beam indicator light LED
To Next Page
Loading...
Need help?
General
