Zebra ZXP 9 Series User Manual

P1086708-001 ZXP Series 9 Card Printer Service Manual 95
Operation
Messages
Messages
Operational
Operational messages are displayed during normal operation.
MESSAGE DESCRIPTION
ALARM
An error message needs to be cleared before normal operations can
resume.
CANCELING
The Cancel button was pressed, and the current operation is being
terminated.
CONFIG DATA
Conguration data is being transferred from the computer to the
printer.
CONTACT OPERATION
Contact smart card is being encoded; i.e., the card is in position and
data is being transferred.
CONTACTLESS OPERATION
Contactless smart card is being encoded; i.e., the card is in position
and data is being transferred.
COOLING
Ready to accept a print job, rollers cooling; e.g., when switching from
2-sided printing to 1-sided printing.
COOLING PRINT JOB WAITING Print job received, cooling rollers to temperature.
COOLING PRINTHEAD TEMPERATURE Cooling printhead to temperature.
COOLING WAITING TO LAMINATE Print job completed, laminator cooling to temperature.
DIAGNOSTIC Diagnostic testing in progress.
JOB DATA Data is being transferred from the computer to the printer.
LAMINATING Print job received, laminating in process.
MAG OPERATION
A magnetic stripe Card is being encoded; i.e., card is in position and
data is being transferred.
MANUALLY INSERT CARD FROM
FRONT
Waiting for manual card feed.
OFFLINE Status toggled (ofine/online) via the OCP Advanced Settings Menu.
PRINTING Print job received, printing in process.
READY Ready and at temperature.
STANDBY Printer is in “sleep” mode; i.e., power save mode.
WAIT INITIALIZING Performing a self test on startup.
WARMING
Ready to accept a print job, rollers heating; e.g., at startup or when
switching from 1-sided printing to 2-sided printing.
WARMING PRINT JOB WAITING Print job received, warming rollers to temperature.
WARMING
WAITING TO LAMINATE
Ready to accept a print job, laminator warming; e.g., when switching
from 1-sided laminating to 2-sided laminating.
WARMING PRINTHEAD TEMPERATURE Warming printhead to temperature.
WARNING
Indicates that additional OCP instructions need to be performed; e.g.,
PRINT RIBBON LOW, etc.

Zebra ZXP 9 Series Specifications

General

Brand	Zebra
Model	ZXP 9 Series
Category	Printer
Language	English