Zebra ZXP 9 Series User Manual

P1086708-001 ZXP Series 9 Card Printer Service Manual 201
ZXP Toolbox
Calibrate
Calibrate
The Calibrate screens that follow enable setting several key parameters for the printer.
Calibrate
Transfer Temperature Offset
Transfer Temperature Offset is provided to globally change the temperature of the heated rollers. If
you have a single card type that you want to change the roller temperatures, you would use custom
card type. If the printer seems to be running too cold or too hot for every card type, you would use
this adjustment to raise or lower the heated roller temperature for all cards. This will not affect what
you see in the card parameters for a given dened card type; see Note above. The adjustment range
is from -10, to 10.
Note that while you will not see a change in card parameters for a given card type when using
the Transfer Temperature Offsets, you will see the change in the OCP Info screen that shows the
temperature set-points and current temperatures.
Top/Bottom Single – Used to adjust the transfer temperature offset for a single-sided printer.
Top/Bottom Double – Used to adjust the transfer temperature of a double-sided printer.

Zebra ZXP 9 Series Specifications

General

Brand	Zebra
Model	ZXP 9 Series
Category	Printer
Language	English