Rockwell Automation Publication 2094-UM002G-EN-P - August 2016 223
Chapter 9
Remove and Replace the Kinetix 6200 and
Kinetix 6500 Drive Modules
This chapter provides remove and replace procedures for your Kinetix 6200
and Kinetix 6500 system components.
Before You Begin
These tools are required before you begin removal and replacement
procedures:
• Screwdriver, 3.5 mm (0.14 in.)
•Voltmeter
Topic Page
Before You Begin 223
Remove Kinetix 6200 and Kinetix 6500 Drive Modules 224
Replace Kinetix 6200 and Kinetix 6500 Drive Modules 227
Remove the Power Rail 228
Replace the Power Rail 229
ATTENTION: This drive contains electrostatic discharge (ESD) sensitive parts
and assemblies. You are required to follow static-control precautions when
you install, test, service, or repair this assembly. If you do not follow ESD
control procedures, components can be damaged. If you are not familiar with
static control procedures, refer to Guarding Against Electrostatic Damage,
publication 8000-4.5.2
, or any other applicable ESD awareness handbook.
To Next Page
Loading...
Need help?
General
