Allen-Bradley Kinetix 6200 User Manual

302 Rockwell Automation Publication 2094-UM002G-EN-P - August 2016
Appendix E Web Server Interface
Administrative Settings
Category
From the Administrative Settings web pages, you can update the drive
identification settings.
The Device Identity tab lets you update the device description and name that
appears on the Home page. By default, all the fields are blank on first power up
(or if they have never been updated). Click Apply to save the values to the
drive.
Figure 139 - Administrative Settings>Device Configuration>Device Identity Tab
Table 141 - Device Identity Features
Browse Power Rail Category
When connected to an integrated axis module (IAM), you are able to browse
the power rail and see the axis modules and their respective location (slot) on
the power rail. Click the link and you are directed to the specific axis module
web page.
Figure 140 - Power Rail Tab
Table 142 - Power Rail Features
Field Name Description
SERCOS
(2094-SE02F-M00-Sx)
EtherNet/IP
(2094-EN02D-M01-Sx)
-S0 -S1 -S0 -S1
Device Identity A non-volatile identification of the drive. – – X X
IMPORTANT The axis modules must be connected to the EtherNet/IP network for the link
to work.
Field Name Description
SERCOS
(2094-SE02F-M00-Sx)
EtherNet/IP
(2094-EN02D-M01-Sx)
-S0 -S1 -S0 -S1
Browse Power Rail Link to all the AM modules that are connected to the same network. XXXX

Allen-Bradley Kinetix 6200 Specifications

General

Brand	Allen-Bradley
Model	Kinetix 6200
Category	Servo Drives
Language	English