Allen-Bradley Kinetix 6200 User Manual

Rockwell Automation Publication 2094-UM002G-EN-P - August 2016 311
Changing the Default IDN Parameter Values Appendix F
Write the New IDN Parameter Value
Follow these steps to write the new IDN parameter value.
1. Configure a Message Configuration (MSG) instruction to write the
IDN parameter value required for your application.
In this example, the Message Configuration (MSG) instruction is set to
write the digital input assignments of your control module.
a. From the Message Type pull-down menu, choose sercos IDN Write
b. From the Identification Number pull-down menus, choose P-0-052.
2. Click New Tag.
3. The New Tag dialog box opens.
4. Type the name of your Source tag.
In this example, the tag name is Write_Value.
5. Click OK.

Allen-Bradley Kinetix 6200 Specifications

General

Brand	Allen-Bradley
Model	Kinetix 6200
Category	Servo Drives
Language	English