Configuring SNTP Settings
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 101
D-Link UWS User Manual
• Click Refresh to display the latest information from the router.
SNTP Global Status
Use the SNTP Global Status page to view information about the system’s SNTP client.
To access the SNTP Global Status page, click LAN > Monitoring > SNTP Summary > Global Status in the
navigation menu.
Last Attempt Status Specifies the status of the last SNTP request to this server. If no packet has
been received from this server, a status of Other is displayed:
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time was
updated.
• Request Timed Out: A directed SNTP request timed out without receiving
a response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not valid.
• Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with its
peers. This is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death: The SNTP server indicated that no further queries
were to be sent to this server. This is indicated by a stratum field equal to
0 in a message received from a server.
Unicast Server Num Requests Specifies the number of SNTP requests made to this server since last agent
reboot.
Unicast Server Num Failed
Requests
Specifies the number of failed SNTP requests made to this server since last
reboot.
Table 27: SNTP Server Status Fields (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
