Managing and Viewing Logs
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 118
D-Link UWS User Manual
Event Log
Use the Event Log page to display the event log, which is used to hold error messages for catastrophic events.
After the event is logged and the updated log is saved in flash memory, the switch will be reset. The log can
hold at least 2,000 entries (the actual number depends on the platform and OS), and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system resets.
To access the Event Log page, click LAN > Monitoring > Log > System Log in the navigation tree.
Figure 45: Event Log
• Click Refresh to update the page with the latest log entries.
Table 39: Event Log Fields
Field Description
Entry The number of the entry within the event log. The most recent entry is first.
Filename The D-Link DWS-4000 Series source code filename identifying the code that
detected the event.
Line The line number within the source file of the code that detected the event.
Task ID The OS-assigned ID of the task reporting the event.
Code The event code passed to the event log handler by the code reporting the
event.
Time The time the event occurred, measured from the previous reset.
To Next Page
Need help?
General
Weight and Dimensions
