Configuring MLD Snooping
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 228
D-Link UWS User Manual
• If you make any changes on the page, click Submit to apply the new settings to the switch.
VLAN Status
Use the MLD Snooping VLAN Status page to view information about the VLANs on the system that are
configured for MLD snooping.
To access the MLD Snooping VLAN Status page, click Monitoring > MLD Snooping > VLAN Status in the
navigation tree.
Figure 133: MLD Snooping VLAN Status
• Click Refresh to re-display the page with the latest information from the router.
Multicast Router Present
Expiration Time
Specify the amount of time you want the switch to wait to receive a query on
an interface before removing it from the list of interfaces with multicast
routers attached. Enter a value between 0 and 3600 seconds. The default is 0
seconds. A value of zero indicates an infinite timeout; i.e., no expiration.
Fast Leave Admin Mode Select the Fast Leave mode for the a particular interface from the pulldown
menu. The default is Disable.
Table 117: MLD Snooping VLAN Status Fields
Field Description
VLAN ID Displays the VLAN IDs for which the MLD Snooping mode is Enabled.
Admin Mode Shows the MLD Snooping Mode for the VLAN ID.
Fast Leave Admin Mode Indicates whether MLD Snooping Fast-leave is active on the VLAN.
Group Membership Interval Shows the amount of time in seconds that a switch will wait for a report from
a particular group on a particular interface, which is participating in the VLAN,
before deleting the interface from the entry. The valid range is 2 to 3600.
Maximum Response Time Shows the amount of time the switch waits after it sends a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. The valid range is 1 to 3599. Its value should
be greater than group membership interval value.
Multicast Router Expiry Time Shows the amount of time to wait before removing an interface that is
participating in the VLAN from the list of interfaces with multicast routers
attached. The interface is removed if a query is not received. The valid range
is 0 to 3600.
Table 116: MLD Snooping Interface Configuration Fields (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
