D-Link DWL-2600AP User Manual

Managing LLDP
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 272
D-Link UWS User Manual
LLDP-MED Remote Device Information
This page displays information on LLDP-MED information received from remote clients on the selected local
interface. To display this page, click LAN > Monitoring > LLDP Status > LLDP-MED > Remote Device
Information in the navigation tree.
Figure 170: LLDP Remote Device Information
Table 153: LLDP-MED Remote Device Information Fields
Field Description
Local Interface Specifies the list of all the ports on which LLDP-MED is enabled.
Remote ID Specifies the remote client identifier assigned to the remote system.
Capability Information Specifies the supported and enabled capabilities that were received in MED
TLV on this port:
• Supported Capabilities: Specifies supported capabilities that were
received in MED TLV on this port.
• Enabled Capabilities: Specifies enabled capabilities that were received in
MED TLV on this port.
• Device Class: Specifies device class as advertised by the device remotely
connected to the port.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm