D-Link DWL-2600AP User Manual

Locating WLAN Devices
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 662
D-Link UWS User Manual
Client Triangulation Location
The Wireless System continually collects detected signal information about wireless clients and records the
data in the Client triangulation tables. The Cluster Controller periodically iterates through the triangulation
tables for all clients in the Detected Clients table and computes the location for each device. Use the pages
available from the Client Triangulation Location link to view device location information derived from the
Client triangulation table.
Client Triangulation Summary
Use the Client Triangulation Summary page to view a summary of device location information that the Cluster
Control computes based on the data in the Client triangulation table. Click the MAC address of a device to view
additional location information about the device.
Figure 417: Client Triangulation Summary

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm