D-Link DWL-2600AP User Manual

Managing the DHCP Server
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 133
D-Link UWS User Manual
Pool Configuration
Use the DHCP Pool Configuration page to create the pools of addresses that can be assigned by the server.
To access the Pool Configuration page, click LAN > Administration > DHCP Server > Pool Configuration in the
navigation tree.
In Figure 57, some of the blank fields where you add IP addresses have been edited out of the image for display
purposes. You can add up to eight addresses in the Default Router Addresses, DNS Server Addresses, NetBIOS
name Server Addresses and IP Address Value fields.
If you select Dynamic or Manual from the Type of Binding drop-down menu, the screen refreshes and a
slightly different set of fields appears.
Figure 57: Pool Configuration

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm