D-Link DWL-2600AP User Manual

Managing VLANs
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 195
D-Link UWS User Manual
Figure 104: MAC-based VLAN Configuration
• If you make any changes, click Submit to apply the changes to the system.
MAC-based VLAN Summary
Use the MAC-based VLAN Summary page to view information about the MAC-to-VLAN mappings configured
on your system.
To display the MAC-based VLAN Summary page, click Monitoring> VLAN Summary > MAC-based VLAN
Summary in the navigation menu.
Figure 105: MAC-based VLAN Summary
• Click Refresh to reload the page and display the most current information.
Table 90: MAC-based VLAN Configuration Fields
Field Description
MAC Address Specifies the source MAC address to map to a VLAN.
VLAN ID Specifies the VLAN to which the source MAC address is to be bound.
Table 91: MAC-based VLAN Summary Fields
Field Description
MAC Address Specifies the MAC address to map to a VLAN.
VLAN ID Specifies the VLAN to which the MAC is to be bound.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm